The useful question for a borescope is whether it can reach and show the surface you need to inspect. Screen size and a large resolution number matter less if the probe cannot pass through the opening or turn toward the inspection area.

Start with access, then compare the camera

  1. Identify the access opening and the clearance along the entire route.
  2. Establish the reach and viewing direction needed at the inspection point.
  3. Check the probe diameter and the space needed for its tip to articulate.
  4. Compare focus information, lighting control and image-storage requirements.
  5. Confirm the permitted temperature, moisture and chemical exposure.

What the current listing specifies

The FlexView Pro 2-veis leddbart inspeksjonskamera listing identifies an 8.5 mm probe, a 4.5-inch IPS screen, adjustable LED lighting, a 3000 mAh battery and USB-C connection. Its specification table gives photo and video resolution as 1920 × 1440; use those dimensions when comparing cameras rather than treating the promotional ‘1920P’ wording as a separate verified standard.

Listed featureWhat to check before purchase
Two-way articulationRange of movement and room needed to turn the tip
8.5 mm probeClearance throughout the intended access route
IP67 probe descriptionWhich components are covered and the manufacturer’s exposure limits
MicroSD supportSupported card specification and whether a card is included
Rechargeable batteryCharging requirements and runtime under the intended settings

Match the image to the decision

A clear image can document visible surface condition or an obstruction. It does not measure compression, prove material strength or reveal every hidden fault. Keep the inspection location and orientation with saved images so another person can understand what they show.

Questions to resolve before checkout

Ask for any missing cable-length, focus-distance, articulation or environmental specification. Do not assume that a probe rating covers the display or connectors, or that every wet, hot or chemically exposed location is suitable. Inspect only within the tool and equipment instructions.

For a task that needs pressure, electrical or leak information instead of a picture, see the diagnostic-tool comparison by test type. Choose the tool that provides the evidence your job needs.

Editorial basis: current Autozono catalog descriptions, checked October 29, 2026. This is a buying guide, not an independent performance test. Verify specifications and compatibility on the linked product pages before purchase.

Leave a Reply

Din e-postadresse vil ikke bli publisert. Påkrevde felt er merket *